Table of Contents
Advertisement
Administrator's Handbook
SHELL Commands
Common Commands
arp nnn.nnn.nnn.nnn
Sends an Address Resolution Protocol (ARP) request to match the
Ethernet hardware address.
clear [ yes ]
Clears the configuration settings in a Motorola Netopia® Gateway. You are prompted to confirm the clear com-
mand by entering yes.
clear_certificate
Removes an SSL certificate that has been installed.
configure
Puts the command line interface into Configure mode, which lets you configure your Motorola Netopia® Gateway
with Config commands. Config commands are described starting on
download [ server_address ] [ filename ] [ confirm ]
This command installs a file of configuration parameters into the Motorola Netopia
File Transfer Protocol) server. The TFTP server must be accessible on your Ethernet network.
You can include one or more of the following arguments with the download command. If you omit arguments, the
console prompts you for this information.
◆
The
server_address
the Motorola Netopia® Gateway configuration file.
◆
The
filename
argument identifies the path and name of the configuration file on the TFTP server.
◆
If you include the optional confirm keyword, the download begins as soon as all information is entered.
You can also download an SSL certificate file from a trusted Certification Authority (CA), on platforms that support
SSL, as follows:
download [-cert] [server_address ] [filename] [confirm]
install [ server_address ] [ filename ] [ confirm ]
Downloads a new version of the Motorola Netopia® Gateway operating software from a TFTP (Trivial File Transfer
Protocol) server, validates the software image, and programs the image into the Motorola Netopia® Gateway
memory. After you install new operating software, you must restart the Motorola Netopia® Gateway.
The
server_address
pia® Gateway operating software is stored. The
ing software file on the TFTP server.
If you include the optional keyword
form the operation.
56
argument identifies the IP address of the TFTP server from which you want to copy
argument identifies the IP address of the TFTP server on which your Motorola Neto-
filename
confirm
, you will not be prompted to confirm whether or not you want to per-
nnn.nnn.nnn.nnn
page 67
.
®
Gateway from a TFTP (Trivial
argument identifies the path and name of the operat-
IP address to an
Advertisement
Table of Contents
