Configure Your Pc For Dynamic Addressing - Motorola Netopia Administrator's Handbook

Configure Your PC for Dynamic Addressing

The following instructions assume that you want to use the automatic configuration and address sharing features
of the Gateway to provide IP information to devices on your Local Area Network. To connect additional computers
that will use the Gateway's address sharing feature repeat these steps for each computer.
Microsoft Windows:
Navigate to the TCP/IP Properties Control Panel.
1.
a. Some Win-
dows versions
follow a path
like this:
b. Some Win-
dows versions
follow a path
like this:
Then go to Step 2.
Select Obtain an IP address automatically.
2.
Select Obtain DNS server address automatically, if available.
3.
Remove any previously configured gateways, if applicable.
4.
Click the OK button. Restart if prompted.
5.
Proceed to the next section
Start Settings
menu ->
Panel Network Network and
-> (or
Dial-up Connections
->
Connection -> Properties
[your_network_card]
or
tocol [TCP/IP] Properties
->
Start Control Panel
menu ->
Network and Internet Connec-
tions Network Connections
->
Local Area Connection
ties Internet Protocol [TCP/IP]
->
-> Properties
"Motorola Netopia® Gateway Quickstart" on page 14
Control
->
Local Area
) -> TCP/IP
Internet Pro-
->
->
Proper-
->
.
11