Repairing Problems; Related Features; Logs; Introduction - Oracle Sun ZFS Service Manual

Logs

For hardware faults, you may be able to select the affected hardware component to locate it on
the

Repairing problems

Problems can be repaired by performing the steps described in the suggested action section.
This typically involves replacing the physical component (for hardware faults) or reconfiguring
and restarting the affected service (for software defects). Repaired problems no longer appear
on this screen.
While the system typically detects repairs automatically, in some cases manual intervention
may be required. If a problem persists after the affected components have been repaired, contact
support. You may be instructed to mark the problem repaired. This should only be done under
the direction of service personnel or as part of a documented Oracle repair procedure.

Related features

■
■
appliance to email administrators or perform other actions when faults are detected.
Logs

Introduction

Alerts
This is the appliance alert log, recording key events of interest during appliance operation. The
following are example alert log entries as they would appear in the BUI:
Time
2009-9-16
13:01:56
2009-9-16
13:01:51
136 Sun ZFS Storage 7x20 Appliance Customer Service Manual • December 2011 E26399–02
Hardware screen.
A persistent log of all faults and defects is available under
Faults and defects are subcategories of Alerts. Filter rules can be configured to cause the
Event ID
f18bbad1-8084-4cab-c950-82ef5b8228ea An I/O path from slot 'PCIe 0'
8fb8688c-08f2-c994-a6a5-ac6e755e53bb A disk has been inserted into
Logs as the Fault log.
Description
to chassis 'JBOD #1' has been
removed.
slot 'HDD 4' of chassis 'JBOD
#1'.
Type
Major alert
Minor alert