Tasks - Oracle Sun ZFS Service Manual

Properties:

Tasks

BUI
▼
Locating a failed component
Go to the Maintenance > Hardware screen.
1
Click the icon on the Storage System or Disk Shelf which has the fault icon.
2
Locate the fault icon in the lists of hardware components, and click it. The image should be
3
updated to show where that component is physically located.
Optionally, click the
4
component will begin to flash.
CLI
To turn on the locate LED using the CLI, run the following commands.
Go to the maintenance hardware context:
hostname:> maintenance hardware
List the appliance components:
hostname:maintenance hardware> list
NAME
chassis-000 hostname
chassis-001 000000000C faulted
Select the chassis and list its components:
hostname:maintenance hardware> select chassis-001
hostname:maintenance chassis-001> list
Chapter 1 • Introduction
label = CPU 0
present = true
faulted = false
manufacturer = AMD
model = Quad-Core AMD Opteron(tm) Processor 8356
part = 1002
revision = 03
cores = 4
speed = 2.14G
icon for that component, if the component has it. The LED on the
STATE MODEL
ok Sun Storage 7410 unknown
J4400
disk
SERIAL
000000000C
Hardware
21