Copying The Printer Description Files For Windows - Toshiba GA-1040 Operator's Manual

51 Copying the printer description files for Windows
Modifying the configuration
You should edit the configuration whenever there is any change to your GA-1040
server or network, such as a server name or IP address. First change the specific
GA-1040 Setup information before configuring the connection.
T
O MODIFY THE CONFIGURATION
1. To edit information for a GA-1040 in the list of available GA-1040, select the GA-1040
by its nickname and click Modify.
2. Edit information in the Modify Server Settings dialog box as necessary, and click OK
when finished.
3. To add a new GA-1040 to the list of available GA-1040s, click Add. Configure the Add
New Server dialog box as outlined in steps 3 through 5 in the previous procedure.
4. To remove a GA-1040, select the GA-1040 by its nickname, and click Remove.
Copying the printer description files for Windows
The User Software CD contains printer description files for popular Windows
applications. Pagemaker 5.0, 6.0, and 6.5 do not support automatic installation of
printer description files from the Printers Control Panel. To make the GA-1040
available in the Print and Page Setup dialog boxes of this application, copy printer
description files to the appropriate location.
T
O COPY THE PRINTER DESCRIPTION FILES
1. On the User Software CD, open the English\Prntdrvr\Ps_drvr (OS folder) folder.
2. Copy the printer description file for your GA-1040 to the appropriate location.
If you use:
PageMaker 5.0 or later
Copy this file:
Efme2020.ppd For PageMaker 5.0,
\ALDUS\USENGLSH\PPD4
For PageMaker 6.0,
\PM6\RSRC\USENGLSH\PPD4
For PageMaker 6.5,
\PM65\RSRC\USENGLSH\PPD4
To this location: