Toshiba GA-1040 Operator's Manual page 68

3. Enter the appropriate information for the GA-1040.
4. When you have entered all the information, click Add.
5. With the device name (GA-1040) selected in the Devices list, click OK.
Device Name of the GA-1040
(GA-1040)
6. With the device name (GA-1040) selected in the list of Available servers, click OK
50 Installing User Software on a Windows Computer
—Enter a name for the GA-1040. This name can be any name you wish; it
Nickname
does not have to match the actual Server Name of the GA-1040.
The nickname cannot contain any of the following seven characters:
N :
OTE
[ ] _ " ' <space> <tab>
—Choose the type of network protocol you are using from the pop-up menu.
Protocol
Command WorkStation software is supported on Windows 95/98/Me,
N :
OTE
Windows NT 4.0, and Windows 2000 over TCP/IP only.
—If you are using the TCP/IP protocol, enter the IP address (or DNS
Server Name
name) of the GA-1040.
—Enter the name of the device the GA-1040 is connected to:
New Device
The GA-1040 appears in the list of available servers. The first line of the entry displays
the nickname you gave the server, followed by the protocol you chose. The second line
displays the device name.
to begin using the software.
.
GA-1040