Toshiba GA-1040 Operator's Manual page 28

10 Installing User Software on a Windows Computer
13. Click Finish, and then close the Printer Port Properties and System Properties dialog
boxes.
You must restart your computer in order to activate the new settings.
After Windows 95/98/Me restarts, you can complete the procedure described in "To
prepare the printer for parallel port printing" on page 6.
Completing the Windows 95/98/Me IPX/SPX or IPX (Novell) connection
If you are printing through a Novell server, the Novell network and file server should
be set up before you begin. The file server should be configured with a print server and
print connection for the GA-1040. For details see your NetWare documentation and
the Configuration Guide.
To print from Windows 95/98/Me computers over IPX (Novell), you must first set up
IPX/SPX protocols, and then configure the GA-1040 by choosing the IPX port type,
and entering the settings for the port you use.
T IPX/SPX
O SET UP PRINTING
1. Click the Start button, choose Settings, and then choose Control Panel.
2. Double-click the Network icon.
Make sure that IPX/SPX-compatible Protocol is listed in the Installed Network
Components section.
For instructions, see your Windows documentation.