Setting Up Smb Printing With Windows 95/98/Me - Toshiba GA-1040 Operator's Manual

13 Setting up PostScript and/or PCL printing with Windows 95/98/Me
6. Click the printer icon labeled with the NetWare print queue you will use and click OK.
7. In the Add Port dialog box, verify that the network path is updated and click OK.
Your print jobs are transmitted to the specified print queue on the Novell file server.
The GA-1040 polls the file server, and if jobs are present, they are transmitted to the
GA-1040.
To confirm the connection, you can print a Windows test page.
8. Click the General tab, click Apply, and click Print Test Page.
If the test page prints successfully, you are ready to print from the computer.

Setting up SMB printing with Windows 95/98/Me

If you do not have a Novell network, you can print via SMB printing (also known as
Windows printing or WINS printing). Printing by this method allows you to install
the PostScript printer driver and printer description files, and print from your
computer to a particular connection (Hold, Print, or Direct) on the GA-1040. To use
PCL, you must install it from your User Software CD. These instructions assume you
have the TCP/IP protocol and Client for Microsoft Networks installed.
To set up printing to a second or third connection on Windows 95/98/Me, you must
install a new printer by repeating the procedure "To set up SMB printing on
Windows 95/98/Me" on page 14. If you install more than one printer, give each a
descriptive name during printer driver installation, such as
you can easily identify printers.
B
EFORE YOU BEGIN
• Configure the GA-1040 for SMB printing using TopAccess in Other Setup Options.
SMB printing is referred to as Windows Printing in Setup, on the TopAccess and on
the Other tab of the Network Setup page. For more information, see the Configuration
Guide.
or , so
Aero-Print Aero-Hold