Toshiba GA-1040 Operator's Manual page 41

23 Setting up PostScript and/or PCL printing with Windows NT 4.0 and/or Windows 2000
3. Click the General tab and click Print Test Page.
When you select print, your files are transmitted over the parallel port connection to
the GA-1040.
4. Click the Sharing tab if you want to share the GA-1040 with network users. Select
Shared (Windows NT 4.0) or Share as (Windows 2000), and select a share name.
Select the operating system or systems used by your network clients if you want to
install a printer driver that those clients can download.
5. Click OK to exit the Printer Properties dialog box.
Completing the Windows NT 4.0 TCP/IP and LPR connection
Once you have installed the PostScript printer driver and printer driver files, complete
the setup for the TCP/IP and LPR connection as follows:
• Prepare the GA-1040 to accept print jobs using TCP/IP and LPR protocols.
(See the Configuration Guide for details.)
• Configure the workstation for the TCP/IP connection.
Before you continue, ask the system administrator for the IP address assigned to the
GA-1040, as well as the subnet mask and the gateway address, if they are used.
The TCP/IP Protocol and Microsoft TCP/IP Printing software should already be
installed on the Windows NT 4.0 workstation.