Toshiba GA-1040 Operator's Manual page 25

7 Setting up PostScript and/or PCL printing with Windows 95/98/Me
6. Select either "Spool print jobs so program finishes printing faster" or "Print directly
to the printer."
The selection you make depends on the action you took in step 3 on page 5:
• If you set the Port Timeout in Seconds to 10, you can select either option; however,
spooling is faster.
• If you set the Port Timeout in Seconds to 5, select "Print directly to the printer."
7. Select "Disable bi-directional support for this printer" and click OK.
8. Click Apply.
You are now ready to print from your applications to the GA-1040 with the parallel
port. To confirm the connection, print a Windows test page.
9. Click the General tab.
10. Click Print Test Page and click OK.
11. Enter user and job identification information for accounting purposes, or whatever
information is required at your site in the Job Notes window, and click OK.
If the test page prints successfully, you are ready to print from the computer.
T
O PREPARE THE PORT FOR PARALLEL PORT PRINTING IN WINDOWS
1. Click the Start button, choose Settings, and then choose Control Panel.
2. Double-click System.
The System Properties window appears.
3. Click the Device Manager tab.
95/98/M
E