Setting Up Ipp Printing With Windows 2000 - Toshiba GA-1040 Operator's Manual

33 Setting up PostScript and/or PCL printing with Windows NT 4.0 and/or Windows 2000
10. In the Printers box, select the appropriate GA-1040 file and click OK.
The printer driver with UC uses Letter as the default paper size; the printer
N :
OTE
driver with EU uses A4 as the default paper size.
The necessary files are installed to your hard drive.

Setting up IPP printing with Windows 2000

With Internet Printing Protocol (IPP), print jobs are sent to the GA-1040 over the
Internet.
IPP printing is supported with Windows 2000 only.
N :
OTE
IPP printing is supported directly for Windows 2000 computers; however, you must
first install the "wpnpins.exe" patch file (available on the Windows 2000 Server
Product CD). For information about this patch, contact the Microsoft Corporation.
The IPP setup procedures are performed after installing the appropriate printer
N :
OTE
drivers. See "To install the PostScript or PCL printer driver for Windows NT 4.0
and/or Windows 2000" on page 18.