Introduction
ix Conventions
This manual describes how to install the user software for the TOSHIBA GA-1040
and set up printing from Microsoft Windows and Apple Mac OS computers.
For information about setting up network servers and clients to use the GA-1040,
see the Configuration Guide. For general information on using the copier, your
computer, your application software, or your network, see the manuals that
accompany those products.
The term "GA-1040" is used in this manual to refer to the TOSHIBA
N
:
OTE
GA-1040. The name "Aero" is used in illustrations to represent the GA-1040.
• User Software CD
• User Documentation CD
• Release Notes
Conventions
The following icons are used in this manual:
Indicates features that require the Postscript option.
Indicates features and functionality for which a hard disk drive is required.
About the documentation
This manual is part of the set of GA-1040 documentation, which includes the
following manuals for users and system administrators:
• The Configuration Guide explains basic configuration and administration of the
GA-1040 for the supported platforms and network environments. It also includes
guidelines for setting up Windows NT and Novell NetWare servers to provide
Adobe PostScript printing services to clients.
• Getting Started describes how to install software to enable users to print to the
GA-1040. Specifically, it describes installation of the PostScript printer drivers,
printer description files, and other software provided on the User Software CD.
It also explains how to connect each user to the network.
™