Table of Contents
Advertisement
1
Introduction and Installation
About the 2D Image Engine
The IMAGETEAM™ (IT) 4X00 Series are small image engines designed for integration into handheld portable data terminals or
other OEM devices. The IT4X00 Series are input devices for reading and decoding linear, stacked linear (PDF417), and 2D
matrix bar code symbologies. The IT4X00 Series incorporate the latest CMOS-based area array sensors. This technology is
being adopted in other markets and products, for example, digital cameras, PC-based video conferencing, video surveillance,
automobiles, and toys. The IT4X00 Series 2D Image Engines function like digital cameras and add functionality and value to an
OEM product by adding additional capabilities such as digital image capture, document lift, signature capture, and reading OCR
A and B characters.
The IT4X00 Series Image Engines are specifically designed for easy integration into most existing portable data terminals. The
size and current draw of the devices allow the engines to drop in with few mechanical modifications. The decoder module
supports a TTL standard RS-232 interface that, in most cases, does not require any hardware modifications to existing platforms.
To ease integration efforts, a Software Developers Kit provides a simple software interface (APIs).
ESD Precautions
The IT4X00 Series engine is shipped in ESD safe packaging. Use care when handling the scan engine outside its packaging.
Be sure grounding wrist straps and properly grounded work areas are used.
Dust and Dirt
The IT4X00 Series engine must be sufficiently enclosed to prevent dust particles from gathering on the imager and lens. Dust
and other external contaminants will eventually degrade unit performance.
Product Specifications
Parameter
Dimensions
Weight
Illumination Source
Aiming Pattern Source
Laser Aimer
Resolution
SR/SF
HD
Rotational Sensitivity
Viewing Angle
Motion Sensitivity
Ambient Light
Temperature Ranges
Humidity
1. Measured from the end of the lens tube.
IMAGETEAM™ 4X00 Series Integration Manual
Specification
See page 3-6 or page 3-7.
Less than 2 ounces (56 g) (Decode Module and Image Module - less than 1 ounce (28.4 g) each)
626 +30 nm red LEDs
526 +30 nm green LEDs
optional 626±30 nm red LEDs (IT4000 only)
650 nm +10 nm/-5 nm
5 mil minimum, Linear symbol
15 mil (.38mm) minimum, 2D Matrix symbol
4 mil (.10mm) minimum, Linear symbol
9 mil (.23mm) minimum, 2D Matrix symbol
360° around optical axis
±40° at the nominal operating distance
approx. 2 inches (5 cm) per second of lateral motion
Total darkness to 100,000 Lux (sunlight)
Operating 14° F to +122° F (-10C to +50C)
Storage -40° F to +158° F (-40C to +70C)
95% RH non-condensing
1 - 1
Advertisement
Table of Contents
