Camera Rear Panel (Cl Versions); Digital Output Connector; Analog Output Connector; Table 6 Mode Selection Switch - JAI TM-1402CL User Manual

TM/TMC/RM/RMC-1402CL
Mode
Selection
Mode Information
Switch
Position
0 Switch Disabled
1 Set Gain
2 Set Vtop (A/D)
3 Set Vbottom (A/D)
4 Gain Selection #1
5 Gain Selection #2
6 Linear LUT
7 Knee Selection
8 Async Reset Mode
9 Factory Default Recall
A Power Up Setting
B User Page Storage #1
C User Page Storage #2
D Direct Shutter Control
E Scan Format2
F Scan Format1
3.2

Camera Rear Panel (CL Versions)

3.2.1

Digital Output Connector

Refer to Section 2.2.2 (d on page 8 for Camera Link information.
3.2.2

Analog Output Connector

The TM-1402CL camera has a BNC connector on the rear panel to output analog video data.
Table 6 Mode Selection Switch
Up/Down Switch
Switch Disabled
Up / Down
Up / Down
Up / Down
Up: 9dB, Down: 12dB
Up: 18dB, Down: 22dB
Up
Up / Down (Scroll)
Up: Normal, Down: Async
Up / Down: Recall
Up: Recall, Down: Save
Up: Recall, Down: Save
Up: Recall, Down: Save
Up: Increment
Down: Decrement
Up: PS500L Down: PS250L
Up: 30fps, Down: 15fps
Operation
Functions
None
Change gain
Change A/D ref. top
Change A/D ref. bottom
Lower gain selection
Higher gain selection
Back to linear table
Scroll 8 different LUTs
Async and normal shutter
Factory setting
Power up page setting
User page storage setting
User page storage setting
Change Direct shutter speed
in 1H increments
Partial Scan 500L
Partial scan 250L
30 fps, 15 fps
13