TM/TMC/RM/RMC-1402CL
3.11 Serial Communication Kit CS-232C (not required for "CL" version)
The TM-1402's functions can be controlled by a PC via RS-232C communication using the CS-232E serial
communication kit. This kit consists of the RS-232B-12 cable, software disk, and quick-start card. The software
disk contains setup files for the graphical user interface (GUI) program. Refer to the camera-control software
manual for information on the GUI.
Note: For CL models, the control software is downloadable. Serial communication is through the Camera Link
cable. No additional accessories are required.
Operation
27