Rear Panel - JAI LQ-050CL User Manual

4.2.

Rear Panel

①
POW ER /
TRIG
W . B .
②
S W 1
Fig2. Rear panel
① LED
 Green (Steady)
Operating, but not receiving external trigger input
 Green (Flashing)
Operating and receiving external trigger input.
Note that the flashing frequency does not correspond to the frequency of the trigger
signal. The flashing does not occur in the No-Shutter internal and Shutter-Select internal
modes.
 Orange
Initializing and cannot operate
1) Initializing for approx. 800ms
2) One-push auto white balance is engaged.
② DIP switch
SW-1 function
No
1 Serial communication
2 Termination of External trigger
Note: Factory default settings for both functions are "OFF".
Serial comm.
1
CL ⇔ HR
７５Ω
2
OFF ⇔ ON
Fig.3 DIP switch
D C IN
/TRIG
Function
OFF
O
N
LQ-050CL
ON
Hirose 12Pin
75Ω
7
Settings
OFF
Camera link (CC1)
TTL