Status; System Information; Ethernet Status - Cisco TelePresence Administrator's Manual

Grey Headline (continued)

Status

System information

The System information page provides details of the software, hardware, and time settings of the
VCS.
To view the System information page:
•
Status > System > Information
Some of the items on this page are configurable, and contain links to the page where they
can be configured. For example, clicking on Software options will take you to the Option
keys page, from where you can install new optional features.
The page displays the following information:
System information
System name The name that has been assigned to the VCS.
Product This will be TANDBERG VCS.
Software version The version of software that is currently installed on the VCS.
Software build
The build number of this software version.
Software release The date on which this version of the software was released.
date
Software name
The internal reference number for this software release.
Software options The maximum number of calls, and the availability of additional VCS
features such as FindMe™, Device Provisioning and Dual Network
Interfaces, are controlled through the use of
shows all the optional features currently installed on the VCS.
Hardware version The version number of the hardware on which the VCS software is installed.
Hardware serial
The serial number of the hardware on which the VCS software is installed.
number
Time Information
Up time The amount of time that has elapsed since the system last restarted.
System time (UTC) The time as determined by the NTP server.
If no NTP server has been configured, this will show Time Not Set.
Time zone The time zone that has been configured on the Time page.
Local time If an NTP server has been configured, the system time in local time (UTC
adjusted according to the local time zone) is shown.
If no NTP server has been configured, the time according to the VCS's
operating system is shown.
Overview and System
Introduction
status configuration
D14049.08
November 2010
option keys. This section
Cisco VCS Zones and Clustering and
configuration neighbors peers
The Ethernet status page provides details of the MAC address and Ethernet speed settings of the
VCS.
To view the Ethernet status page:
•
Status > System > Ethernet
The page displays the following information for the LAN 1 port and, if the Dual Network Interfaces
option key has been installed, the LAN 2 port:
MAC address The MAC address of the VCS's Ethernet device for that LAN port.
Speed The speed of the connection between the LAN port on the VCS and the
Ethernet switch.
Call Bandwidth
processing control
20
CISCO TELEPRESENCE VIDEO COMMUNICATION SERVER

Ethernet status

Firewall
Applications Maintenance
traversal
ADMINISTRATOR GUIDE
Appendices