Cisco TelePresence Administrator's Manual page 222

Grey Headline (continued)
Command reference - xConfiguration
SIP Registration Proxy Mode: <Off/ProxyToKnownOnly/ProxyToAny>
Specifies how proxied registrations should be handled.
Off: registration requests will not be proxied.
ProxyToKnownOnly: registration requests will be proxied to neighbors only.
ProxyToAny: registration requests will be proxied in accordance with the VCS's existing call processing rules.
Default: Off
Example: xConfiguration SIP Registration Proxy Mode: Off
SIP Require Duo Video Mode: <On/Off>
Controls whether the VCS will require the use of the com.tandberg.sdp.duo.enable extension for endpoints that support it.
Default: On
Example: xConfiguration SIP Require Duo Video Mode: On
SIP Require UDP BFCP Mode: <On/Off>
Controls whether the VCS will require the use of the com.tandberg.udp.bfcp extension for endpoints that support it.
Default: On
Example: xConfiguration SIP Require UDP BFCP Mode: On
SIP Routes Route [1..20] Address: <S:0..39>
Specifies the IP address of the next hop for this route, where matching SIP requests will be forwarded.
Note: this command is intended for developer use only.
Example: xConfiguration SIP Routes Route 1 Address: "127.0.0.1"
SIP Routes Route [1..20] Authenticated: <On/Off>
Whether to forward authenticated requests.
On: only forward requests along route if incoming message has been authenticated.
Off: always forward messages that match this route.
Default: Off
Note: this command is intended for developer use only.
Example: xConfiguration SIP Routes Route 1 Authenticated: On
SIP Routes Route [1..20] Header Name: <S:0..64>
Name of SIP header field to match (e.g. Event).
Note: this command is intended for developer use only.
Example: xConfiguration SIP Routes Route 1 Header Name: "Event"
Overview and System
Introduction
status configuration
D14049.08
November 2010
Cisco VCS Zones and Clustering and
configuration neighbors peers
Call Bandwidth
processing control
222
CISCO TELEPRESENCE VIDEO COMMUNICATION SERVER
Firewall
Applications Maintenance
traversal
ADMINISTRATOR GUIDE
Appendices