Cisco TelePresence Administrator's Manual page 220

Grey Headline (continued)
Command reference - xConfiguration
Registration RestrictionPolicy: <None/AllowList/DenyList>
Specifies the policy to be used when determining which endpoints may register with the system.
None: no restriction.
AllowList: only endpoints attempting to register with an alias listed on the Allow List may register.
DenyList: all endpoints, except those attempting to register with an alias listed on the Deny List, may register.
Default: None
Example: xConfiguration Registration RestrictionPolicy: None
ResourceUsage Warning Activation Level: <0..100>
Controls if and when the VCS will warn that it is approaching its maximum licensed capacity for calls or registrations. The number represents the percentage of the maximum that, when
reached, will trigger a warning. 0: Warnings will never appear.
Default: 90
Example: ResourceUsage Warning Activation Level: 90
Services AdvancedMediaGateway Policy Mode: <On/Off>
Controls whether the policy rules are used to control access to the Advanced Media Gateway.
Default: Off
Example: xConfiguration Services AdvancedMediaGateway Policy Mode: On
Services AdvancedMediaGateway Policy Rules Rule [1..200] Action: <Allow/Deny>
The action to take if the source or destination alias of the call matches this policy rule.
Allow: the call can connect via the Advanced Media Gateway.
Deny: the call can connect but it will not use Advanced Media Gateway resources.
Default: Allow
Example: xConfiguration Services AdvancedMediaGateway Policy Rules Rule 1 Action: Allow
Services AdvancedMediaGateway Policy Rules Rule [1..200] Description: <S: 0..64>
A free-form description of the Advanced Media Gateway policy rule.
Example: xConfiguration Services AdvancedMediaGateway Policy Rules Rule 1 Description: "Deny all calls to branch office"
Services AdvancedMediaGateway Policy Rules Rule [1..200] Name: <S: 0..50>
Assigns a name to this Advanced Media Gateway policy rule.
Example: xConfiguration Services AdvancedMediaGateway Policy Rules Rule 1 Name: "Deny branch calls"
Services AdvancedMediaGateway Policy Rules Rule [1..200] Pattern String: <S: 0..60>
The pattern against which the alias is compared.
Example: xConfiguration Services AdvancedMediaGateway Policy Rules Rule 1 Pattern String: ".branch@example.com"
Overview and System
Introduction
status configuration
D14049.08
November 2010
Cisco VCS Zones and Clustering and
configuration neighbors peers
Call Bandwidth
processing control
220
CISCO TELEPRESENCE VIDEO COMMUNICATION SERVER
Firewall
Applications Maintenance
traversal
ADMINISTRATOR GUIDE
Appendices