Turn Relays; Presence; Cisco Vcs Zones And Clustering And Configuration Neighbors Peers; System Configuration - Cisco TelePresence Administrator's Manual

Grey Headline (continued)
Status
The TURN relays page lists all the currently active TURN relays on the VCS. For each relay, it shows
the requesting client address and port and the corresponding VCS address and port.
TURN services are available on VCS Expressways only. They are configured from the TURN
page (VCS configuration > Expressway > TURN).
To view the TURN relays page:
•
Status > TURN relays
The page displays the following information:
Relay The index number of the relay.
Address The IP address and port on the VCS of the relay resource that has been
allocated for this particular request.
Client The IP address and port on the NAT (or the client if there is no NAT) that
requested the relay
Creation time
The date and time the relay became active.
Expiry time The date and time the relay will become inactive.
Click View to go to the TURN relay summary page where you can see more information about a
relay. From here further detailed information about the relay can be viewed by using the links in the
Related tasks section at the bottom of the page:
•
View permissions for this relay takes you to the TURN relay permissions page, where you can
view information about the permissions that have been defined on the relay.
•
View channels for this relay takes you to the TURN relay channels page, where you can view
information about the channel bindings that have been defined on the relay.
•
View counters for this relay takes you to the TURN relay counters page, where you can view
TURN request, response and error counters, as well as media counters, for the relay.
Overview and System
Introduction
status configuration
D14049.08
November 2010

TURN relays

Cisco VCS Zones and
configuration neighbors
The Status > Applications > Presence menu has three sub-menus:
•
Publishers
•
Presentities
•
Subscribers.
These pages provide information about endpoints and presentities using the
the VCS.
Refer to the Viewing presence status
pages.
Clustering and Call Bandwidth
peers processing control
28
CISCO TELEPRESENCE VIDEO COMMUNICATION SERVER

Presence

Presence
section for a full explanation of the information on these
Firewall
Applications Maintenance
traversal

ADMINISTRATOR GUIDE

services on
Appendices