Command Reference - Xstatus - Cisco TelePresence Administrator's Manual

Grey Headline (continued)

Command reference - xStatus

The xStatus group of commands are used to return information about the current status of the VCS. Each xStatus element returns information about one or more sub-elements.
The following pages list all the xStatus commands currently available on the VCS, and the information that is returned by each.
To obtain information about the existing status on the VCS:
type xStatus to return the current status of all status elements on the VCS.
•
type xStatus <element> to return the current status for that particular element and all its sub-elements.
•
type xStatus <element> <sub-element> to return the current status of that group of sub-elements.
•
To obtain information about the xStatus commands:
type xStatus ? to return a list of all elements available under the xStatus command.
•
Overview and System
Introduction
status configuration
D14049.08
November 2010
Cisco VCS Zones and Clustering and
configuration neighbors peers
Overview
Call Bandwidth
processing control
265
CISCO TELEPRESENCE VIDEO COMMUNICATION SERVER
Firewall
Applications Maintenance
traversal
ADMINISTRATOR GUIDE
Appendices