Cisco TelePresence Administrator's Manual page 224

Grey Headline (continued)
Command reference - xConfiguration
SIP Session Refresh Value: <90..7200>
The maximum time allowed between session refresh requests for SIP calls. For further information refer to the definition of Session-Expires in
Default: 1800
Example: xConfiguration SIP Session Refresh Value: 1800
SIP TCP Mode: <On/Off>
Determines whether incoming and outgoing SIP calls using the TCP protocol will be allowed.
Default: On
Example: xConfiguration SIP TCP Mode: On
SIP TCP Outbound Port End: <1024..65534>
Specifies the upper port in the range to be used by outbound TCP/TLS SIP connections.
Default: 29999
Example: xConfiguration SIP TCP Outbound Port End: 29999
SIP TCP Outbound Port Start: <1024..65534>
Specifies the lower port in the range to be used by outbound TCP/TLS SIP connections.
Default: 25000
Example: xConfiguration SIP TCP Outbound Port Start: 25000
SIP TCP Port: <1024..65534>
Specifies the listening port for incoming SIP TCP calls.
Default: 5060
Example: xConfiguration SIP TCP Port: 5060
SIP TLS Mode: <On/Off>
Determines whether incoming and outgoing SIP calls using the TLS protocol will be allowed.
Default: On
Example: xConfiguration SIP TLS Mode: On
SIP TLS Port: <1024..65534>
Specifies the listening port for incoming SIP TLS calls.
Default: 5061
Example: xConfiguration SIP TLS Port: 5061
SIP UDP Mode: <On/Off>
Determines whether incoming and outgoing SIP calls using the UDP protocol will be allowed.
Default: On
Example: xConfiguration SIP UDP Mode: On
Overview and System
Introduction
status configuration
D14049.08
November 2010
Cisco VCS Zones and Clustering and
configuration neighbors peers
Call Bandwidth
processing control
224
CISCO TELEPRESENCE VIDEO COMMUNICATION SERVER
RFC 4028.
Firewall
Applications Maintenance
traversal
ADMINISTRATOR GUIDE
Appendices