Configuring Motion Detection Recording - HIKVISION Digital Video Recorder User Manual

User Manual of Digital Video Recorder

5.3 Configuring Motion Detection Recording

Purpose:
Follow the steps to set the motion detection parameters. In the live view mode, once a motion detection event
takes place, the device can analyze it and perform some response actions to handle it. Enabling motion detection
function can trigger certain channels to start recording, or trigger full screen monitoring, audible warning, notify
the surveillance center and so on. In this chapter, you can follow the steps to schedule a record which triggered
by the detected motion.
Steps:
1. Enter the Motion Detection interface.
Menu>Camera>Motion
2. Configure Motion Detection:
1) Choose camera you want to configure.
2) Check
3) Drag and draw the area for motion detection by mouse. If you want to set the motion detection
for all the area shot by the camera, click
click
4) Click
5) Select the channels which you want the motion detection event to trigger recording.
6) Click
7) Click
8) Click
Detection interface.
Figure 5. 15 Motion Detection
checkbox to enable motion detection.
.
to configure the motion detection settings in the pop-up message box.
Figure 5. 16 Motion Detection Settings
to save the settings.
to back to the upper level menu.
in the Motion Detection interface to save the settings. Exit the Motion
58
. To clear the motion detection area,