HIKVISION Digital Video Recorder User Manual page 54

User Manual of Digital Video Recorder
3. Encoding Parameters for Sub-stream
1) Select Substream tab to set the parameters of sub-stream. Configure the stream type, resolution,
frame rate, etc.
2) Click
3) You can click
for other analog channels.
4. Configure the overwrite mode of the HDD (Menu>Record>Advanced). Check
overwrite mode, and then the record files will be overwritten when the HDD becomes full. Otherwise, the
recording will stop when the HDD becomes full.
Figure 5. 5 Copy Camera Settings
Figure 5. 6 Sub-stream Encoding
to save the settings.
to copy the settings to other analog channels, if the setting can also be used
Figure 5. 7 Overwrite Mode
53
checkbox to enable the