Configuring Remote Alarm Host Settings - HIKVISION Digital Video Recorder User Manual

User Manual of Digital Video Recorder
the port No. for each device should be unique.
Figure 9. 18 External Port Settings Dialog Box
2) Click
3) You can click
Figure 9. 19 UPnP™ Settings Finished-Manual

9.2.6 Configuring Remote Alarm Host Settings

Purpose:
With a remote alarm host configured, the device will send the alarm event or exception message to the host
when an alarm is triggered. The remote alarm host must have the CMS (Client Management System) software
installed.
Steps:
1. Enter the Network Settings interface.
Menu > Configuration > Network
2. Select the More Settings tab to enter the More Settings interface.
to save the settings.
to get the latest status of the port mapping.
Figure 9. 20 More Settings Interface
126