Detecting Bad Sector - HIKVISION Digital Video Recorder User Manual

User Manual of Digital Video Recorder

10.7 Detecting Bad Sector

Purpose:
You can detect the bad sector of the HDD to check the status of the HDD.
Steps:
1. Enter the Bad Sector Detection interface.
Menu>Maintenance>HDD Detect>Bad Sector Detection
2. Select a HDD and choose Full Detection or Key Area Detection as the detection type.
3. Click to start detecting.
4. You can click
5. If there is error information about the HDD, you can click
Figure 10. 22 Bad Sector Detection
Figure 10. 23 Bad Sector Detecting
to pause the detection and click
151
to resume the detection.
to view the information.