Configuring Motion Detection Recording - HIKVISION DS-7104HGHI-SH User Manual

5.3 Configuring Motion Detection Recording

Purpose:
Follow the steps to set the motion detection parameters. In the live view mode, once a motion detection event
takes place, the DVR can analyze it and do many actions to handle it. Enabling motion detection function can
trigger certain channels to start recording, or trigger full screen monitoring, audio warning, notifying the
surveillance center, sending email and so on.
Steps:
1. Enter the Motion Detection interface.
Menu>Camera>Motion
2. Configure Motion Detection:
1) Choose camera you want to configure.
2) Check the checkbox after Enable Motion Detection.
3) Drag and draw the area for motion detection by mouse. If you want to set the motion detection for all the
area shot by the camera, click Full Screen. To clear the motion detection area, click Clear.
4) Click the , and the message box for channel information pops up.
Digital Video Recorder User Manual
Figure 5. 12 Motion Detection
Figure 5. 13 Motion Detection- Mask
82