Configuring Redundant Recording - HIKVISION Digital Video Recorder User Manual

User Manual of Digital Video Recorder

5.7 Configuring Redundant Recording

Purpose:
Enabling redundant recording, which means saving the record files not only in the R/W (read/write) HDD but
also in the redundant HDD, will effectively enhance the data safety and reliability.
Note: You must set the Storage mode in the HDD advanced settings to Group before you set the HDD property
to Redundant. For detailed information, please refer to Chapter 10.3 Managing HDD Group. There should be at
least another HDD or network disk which is in R/W mode.
Steps:
1. Enter HDD Information interface.
Menu> HDD
2. Select the HDD and click
1) Set the HDD property to Redundancy.
2) Click
3) Click
3. Enter the Record setting interface.
Menu> Record> Parameters
1)
Select Record.
Figure 5. 30 HDD General
to enter the Local HDD Settings interface.
Figure 5. 31 HDD General-Editing
to save the settings.
to back to the upper level menu.
65