D-Link DGS-1500-20 Reference Manual page 89

5 Configuration
3) After the Profile ID has been created, click Continue to go back to the main Access Profile List page,
clicking the Edit / New Rules button to enter the Access Rule List page.
Profile ID: Indicates the corresponding access profile Identification number.
Access ID: Indicates the access rule Identification number.
Profile Type: Displays the profile type.
Summary: Displays the access rule summary.
Action: Displays the access rule action.
To add a new rule, click Add:
Profile Information displays the information to which the rule is being added to, including Profile ID and
Ether Type.
In Rule Detail, you can specify the details of an access rule. Below are all the possible parameters that can
be set.
Access ID: Specify the Access ID (1-65535).
Type: Display the type of rule.
VLAN ID: Specify the VLAN ID.
Destination MAC Address: Specify the destination MAC address.
Source MAC Address: Specify the source MAC address.
802.1p: Specify the 802.1p. The possible value is from 0 to 7.
Ether Type: Specify the Ether Type. The field range is from 1501 to 65535.
Ports: Specify the switch ports that you want to implement the access rule to.
Action: Specify the ACL forwarding action matching the rule criteria. Permit forwards packets if all
other ACL criteria are met. Deny drops packets if all other ACL criteria is met.
Click Apply to make it effective.
Figure 5.113 – Access Rule List
Figure 5.114 – Add Access Rule
84
D-Link Web Smart Switch User Manual