D-Link DGS-1500-20 Reference Manual page 83

5 Configuration
The Add ACL Profile IPv4 ACL ICMP address page contains the following fields:
Field
Source IP Mask
Destination IP Mask
ICMP Type
ICMP Code
Click Add button then the ACL profile is added.
To define the IPv4 ACL IGMP profile: Select IPv4 ACL with IGMP and click Select button. The updates to
show the follows:
Figure 5.106 – Add Access Profile (IPv4 ACL ICMP)
Description
Defines the range of source IP addresses, relevant to the ACL rules.
(0=ignore, 1=check).
For example, to set 176.212.XX.XX, use mask 255.255.0.0
Defines the range of destination IP addresses, relevant to the ACL rules.
(0=ignore, 1=check).
For example, to set 176.212.XX.XX, use mask 255.255.0.0
Sets the ICMP Type field as an essential field to match.
Sets the ICMP code field as an essential field to match.
78
D-Link Web Smart Switch User Manual