Security > Traffic Segmentation - D-Link DGS-1500-20 Reference Manual

5 Configuration
D-Link Web Smart Switch User Manual
lock is enabled. Using the drop-down menu, change Admin State to Enabled, and then click Apply to
confirm the setting.
Figure 5.82 – Security > Port Security
Security > Traffic Segmentation
This feature provides administrators to limit traffic flow from a single port to a group of ports on a single
Switch. This method of segmenting the flow of traffic is similar to using VLANs to limit traffic, but is more
restrictive.
Figure 5.83 – Security > Traffic Segmentation
Click Apply to enable or disable this feature.
To configure traffic segmentation specify a port or All ports from the switch, using the From Port pull-down
menu and select To Port then click Apply to enter the settings into the Switch's Traffic Segmentation table.
Click Select All button to check all ports or click Clear button to uncheck all ports.
64