_ _ _ _ _ _ _ _ _ _ CHAPTER 3 PROGRAMMING
Run the program and compare:
Notice that the angle is steeper and the two lines are closer together.
This is because each individual column now overlaps the next one.
Notice also that it prints more slowly, although with this amount of
printing the difference in speed may be hard to detect.
Now try double density, normal speed (ESC V):
30
LPRINT
CHR$(27);CHR$(89);CHR$(11);CHR$(0);CHR$(1);CH R$(2);
CH R$(4);CH R$(9);CH R$(18);CH R$(36);CH R$(72);CH R$(144);CH R$(32);
CH R$(64);CH R$(128)
Aside from printing speed, there should be no difference, because
the pattern does not include adjacent dots; if it had, some dots
would have been skipped.
69