Oki 182 Handbook page 15

_ _ _ _ _ _ _ _ _ _ _ CHAPTER 1 SETTING UP
6. Press gently on the cartridge until you feel it snap into place. To
remove the ribbon cartridge, make sure the print head is away
from the rollers, then grasp the cartridge on both sides of the
print head and lift up.
7. The blue lever located to the left of the ribbon cartridge is used
to adjust the print head gap for single- or multi-part paper.
-
When single-part paper or two-part paper is in the printer, slide
the blue lever toward the print head. To print on three- or four ­
part paper, slide the lever away from the print head.
-
-
7