Oki 182 Handbook page 32

ML182/183--------------------------------­
receive data from the printer). The indicator
is out when the printer is
de~elected
and
duri ng self test.
TOF Switch:
To set the first line position on each page
(top of form), deselect the printer and press
this switch when the print head is at the
desired position. You can also select
17.1-character-per-inch printing with this
switch by holding it down when turning
printer power ON.
FORM FEED Switch:
To advance the paper to the next page
(top of form), press this switch while the
printer is deselected. You can also select
NLQ (near letter quality, page 76) with this
button. Just hold down the FORM FEED
button while you're switching on the
printer.
ALARM Indicator: Lights when paper supply is low or ex­
­
hausted (unless you use the command to
disable the alarm, described on page 75).
Printing stops until the paper
~upply
is
replenished.
LINE FEED Switch:
If you want to advance the paper one line,
press this switch while the printer is
deselected. It is also used to perform a self
test: turn ON the printer power while
holding down this pushbutton.
The lever on the printer allows you to adjust the paper.
PAPER LOCK/RELEASE LEVER:
Open (slide forward) for inserting paper, for
adjusting paper, and when using tractor feed
computer paper. Close (slide back) for roll
paper and for single sheets.
PAPER GAP ADJUSTMENT:
Slide toward the print head when inserting
single sheets, and away when using
-
multipart paper.
22