Oki 182 Handbook page 39

- - - - - - - - - - - - CHAPTER 2 OPERATION
9.
Pull
the paper supplied to the front of the platen in Step 8
through the slit between the indicator and the platen, align
the front ends of the roll paper along the feeder side, and
close the release lever.
10. Close the bail arm lever.
-
11. Replace the access cover: Fit the cover tabs into the slots at
the printer front. Next lower the cover carefully, making
sure the paper fits into the slot in the access cover.
12. By turning the platen knob, move the paper to the point
where you want printing to start. (Remember that many
word processing packages automatically allow for a top
margin of 25.4 mm (1 inch).)
29