Oki 182 Handbook page 138

-
ML182/183 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __
Speed
9600
4800
2400
1200
600
300
150
110
Switch 6:
-
Switch 2 Switch 3
Switch 4
-
ON
ON
ON -
OFF ON ON
ON OFF ON
OFF OFF ON
ON ON
OFF
-
OFF
ON
OFF
ON
OFF OFF
-
OFF OFF OFF
Factory set in the ON position; this setting allows the
­
printer to receive data with parity (the way most
popular personal computers transmit data).
­
NOTE: Switches not mentioned in the list above are not currently used and should be
left in their factory settings.
If you have the know-how and the necessary tools and equipment to
­
make your own cable, here is what you will need:
1. A-25 conductor cable. We recommend a shielded cable con­
sisting of 22 Awe standard wires not to exceed 10 feet in
length.
2. One 25-pin plug: equivalent to Cannon DB25-P for the IBM
side.
3. One 36-pin plug: equivalent to Amphenol 57-30360 for the
printer side.
­
4. Wire the pins on the 25-pin plug to those on the 36-pin plug as
shown below:
-
120