Oki 182 Handbook page 50

M~82/183
__________________________________
-
Skip Over Perforation: If you use fanfold paper with your printer,
you may need to use this command to in­
struct the printer to automatically advance
the paper over the perforations.
Character Pitch: You can change from 10 to 12 or 17.1
characters per inch and you can also double
the character width (10 characters per inch
to 5 characters per inch, 12 characters per
inch to 6 characters per inch and 17.1
characters per inch to 8.5 characters per
inch).
Enhanced/Emphasized: Prints characters in a bolder type, common ­
ly used for titles and subtitles.
Underlining: Underlines a word or group of words.
Character Sets:
Choose from two different character sets;
IBM character set either I or II is selectable
(see page 56). There is also a switch selec ­
tion which enables you to power up the
printer in either set and to establish the
default character set.
APA Graphics:
Enables you to draw graphs, charts, and
pictures.
Cancel: Clears the data in the print buffer.
What you do next depends on whether you have invested in a soft­
ware package. If you have, skip to page 43 for advice on how to
add these features to your prepackaged software. If you do not have
a software package, continue reading.
The printer will not do certain things unless you specifically tell it to.
You instruct the printer to change the way it prints by sending
special codes through your computer. When you write a program,
you include the codes for printing features you want in your pro ­
gram. In BASIC, for example, include them in an LPRINT statement.
-
-
-
-
-
38