Oki 182 Handbook page 72

-
ML182/183 - - - -_ _ _ _ _ _ _ _ _ _ _ _ __
­
-
PROGRAM NOTES:
Line 5 erases the display of function key values so they are not
printed.
-
Line 10 activates the medium-resolution graphics screen.
Line 15 clears the screen.
Lines 20 to 80 draw the pattern on the screen.
Line 1000 is an "infinite loop" that keeps the computer occupied.
If
you omit this line, or put an END statement in the program, the
screen will display a prompt sign when the program is completed.
If
you put in a STOP statement, the screen will display "Break in
­
1000." In these cases, the prompt or break message would also ap ­
pear on your printout; line 1000 in our program prevents this from
­
happening. When you want to stop the program after performing the
screen dump, press the BREAK key.
RUN the program, and when the graphics pattern appears on the
screen, simply press the SHIFT and Prt Sc keys at the same time; the
printer will then print the image shown below. When you finish,
press the BREAK key to stop the program.
-
-
-
FIGURE 2
­
-
60