Ml182/183 __________________________________
If you want to print superscript characters (characters appearing
above the normal print line), send the ESC SO command before the
characters, symbols, or word(s) you want printed in superscript. To
return to printing on the normal print line, use the ESC T command.
If you want to print subscript characters (characters appearing below
the normal print line), use the ESC 51 command before entering the
characters. To return to printing on the normal print line, use the
ESC T command.
Superscript and subscript characters are printed in normal characters.
NOTE: Printing returns to the normal line when
ESC SO
is used to cancel subscript
or
ESC ST
is used to cancel superscript.
10 LPRINT "This is a ";
20 LPRINT CHR$(27);"S";CHR$(0);"superscript"
30 LPRINT CHR$(27);"T";"This is a";
40 LPRINT CHR$(27);"S";CHR$(1);"subscript"
50 LPRINT CHR$(27);"T";"This is back to normaL"
This i1:> a _ ...."._....
_o ....
,,,.~
This is a
_ub_e .... '"._
This is back to norMal.
-
-
-
-
-
-
-
-
-
-
-
54