- - - - - - - - _ A P P E N D I X
B SOFTWARE NOTES
Because ribbon selection happens to be a toggle, the same
keys turn the feature on and off (example: "!\PY underline
!\PY stopped" would give you this: "underline stopped"),
you must enter the code to turn off the command.
Type
~,
then enter the following code sequence to turn off
the continuous underlining:
1 B
<CR>
2D
<CR>
00
<CR>
<CR>
MENU ITEM 0: USER DEFINED FUNCTIONS
This selection lets you set WordStar commands to make
any four feature changes. Keep in mind that for each fea
ture you want to use, you'll need to add a command to
turn it off. We're going to use one command for Con
densed print (17.1 cpi), one for Double-width printing, one
to stop both of these features (i.e., return to 10 cpi print
ing), and one to stop superscripts or subscripts. (See Chart
on
pages 77 to 80.)
Type
~.
Then enter the code sequence to start condensed
printing:
OF
<CR>
.
<CR>
Type
~.
Then enter the code for double-width printing:
1B
<CR>
57
<CR>
01
<CR>
<CR>
101