Oki 182 Handbook page 14

ML182/183 __________________________________
5. Place the black ribbon cartridge on the ribbon cartridge holder.
The easiest method is to tilt the back of the cartridge so that it
slides into the area of the plate that is nearest the front of the
printer, then lower the top of the cartridge (where the plastic
ribbon shield is located) over the print head. The tabs on both
side of the cartridge should align perfectly with the inserts on
­
the print head plate.
CAUTION: Use only genuine OKI ribbon cartridges in your printer.
Do not remove the ribbon shield.
Ribbon
Ribbon cartridge holder
6