Oki 182 Handbook page 107

- - - - - - - - - A P P E N D I X B SOFTWARE NOTES
Using SuperCalc
3
To Create Graphs
SuperCalc
1
does not require the user to place data that is to
be depicted in graphic form in any special location. All
you need to do is direct the SuperCalc
1
program to the lo­
cation where the data can be found. Consult your Super ­
Calc
l
manual for instructions on using its graphing features.
Please read this section before going further.
Setting Up Your Graph
In
the instructions which follow, type the underlined text.
1. From the command line, type IV. SuperCalc
1
will dis ­
play the graph options available to you.
2. Type:
D for Data, then when prompted, type:
B5:E8
This loads the location of the data. Enter a return
<CR> to send control back to the /view command
line.
3. Type:
H for heading, then M for Main Heading.
Enter
Q
for the range.
Repeat the above for S(Sub) headings and enter C2.
Enter two returns <CR> to send control back to
the /view command line.
4. Type:
V for Var labels
Enter the range A5:A8. Enter a return <CR> to dis ­
play the graphic command line.
Type:
I
for time labels and enter the range B4:E4 as the data
for the time headings. Enter a return <CR> to send
control back to the /view command line.
91