13.4
Configuration software settings
Click on 'Comms' and 'Port' and ensure that the port number
corresponds to the one being used on the computer. Click on the correct
port number if there is a check mark by the wrong setting.
Click on 'Comms' and 'BaudRate' and ensure that it is set to 9600 for
instruments without the RS 485 communications option. For instruments
with RS 485, ensure that the setting in the configuration software is the
same as in the instrument. Correct if there is a check mark by the wrong
value.
Click on 'Comms' and 'Protocol' and ensure that it is set to 'Jbus' for
instruments without the RS 485 communications option. For instruments
with RS 485, ensure that the setting in the configuration software is the
same as in the instrument. Correct if there is a mark by the wrong
setting.
Click on the tabs 'Configuration', 'Parameters' and 'Access' and select
the settings required.
For a detailed description of all parameters, please see the instrument
instruction manual.
65