and the commands to select the program state appear in the
"Programmed Setpoint" card:
From the "Programmed setpoint" menu select New/Modify
New Setpoint programs can be created and saved in this window or
already existing programs loaded from the Menu File, for any
modifications.
To create a new program:
1. select one of the items of the "Recover action after blackout"
parameter
2. select an item of the "time unit" parameter
3. select the number of segments which make up the program (minimum
1, maximum 14)
4. select the number of program cycles (from 0 to 9999, where 0
indicates infinite cycles) and enter the dead band value.
83