Athena C10 Communications Manual page 89

N.B. The admitted addresses are between 1 and 247; 256 is the address
of the device master; 0 is the BROADCAST address for transfer the
parameter to all the connected devices!
Select in the list "Datum Address" under "Write To" the address where
you want to transfer the parameter.
N.B. The admitted addresses are between 1 and 256 (modbus) or
between 0 and 255 (jbus); besides are visualized the variable
configurated (VAR_1..VAR_16).
Press the button "OK" for confirm the immission or press the button
"CANCEL" for cancel the immission.
To modify the values of a connection previously introduced, select it
with a click of the mouse.
Press the button "Modify".
Is visualized the window "Master Communications Edit" with the values of
the selected connection.
Modify the values as in demand, acting in the same way for the insertion
of a new connection.
89