Athena C10 Communications Manual page 84

The decimals number, as already set in the Configuration – Config.
Configurator input, is also displayed.
To limit the Setpoint to the full programmed setpoint range select "SP
limit full range" from the Programmed setpoint menu.For each segment
set:
- time
- Setpoint value
- OP3 and OP4 output state.
At the end of the setting press:
- Enter: to validate the data entered
- Cancel: to quit the screen without saving
Print: to print the window containing the data entered.
-
Or select Setpoint Profile from the menu.
To display the window of the setpoint profile of the data entered in the
New/Modify page program:
Press "Print" to print the window.
84