To Eliminate A Constant; Reading/Writing Of The Configuration Of The Mathematical Packet In The Device; Save The Configuration Of The Mathematical Packet On Files; Definition Of The Profibus Parameters (X5000 Controller Only) - Athena C10 Communications Manual

13.15.2 To eliminate a constant

To eliminate a constant previously introduced, select it with a click of the
mouse like for the modification and press the button "Delete".
At the end of the configuration of the mathematical constants, press the
button "Close" for return to the window of the configurator.
13.15.3 Reading/writing of the configuration of the
mathematical packet in the device
The download of the configuration of the mathematical packet and of the
master communications comes effected automatically when you take
place the download of the configuration and of the parametrizzation (see
what explained above).
13.15.4 Save the configuration of the mathematical
packet on files
The saving on files of the configuration of the mathematical packet and of
the master communications comes effected automatically when you take
place the saving of the configuration and of the parametrizzation (see
what explained above).

13.16 Definition of the Profibus parameters (X5000 controller only)

The definition of the parameters consists to define the packet of
supervision of the PLC or of the PC: define the parameters that will be
read and write.
This phase is done using the software of configuration of the Profibus.
This software cretes two file:
1) one for the master: the GSD file
2) one for the regulator X5000
The GSD file of the master must be used in the software of configuration
of the same master.
The file for the instrument X5000 must be sended by serial comunication
to the regulator.
For perform the software of configuration of the Profibus, after have
started the Configurator, it is necessary select the Configuration voice
from the Profibus menu (see figure 1).
Figure 1
94