How To Insert The Parameters In The Configuration (X5000 Controller Only) - Athena C10 Communications Manual

It comes as visualized the principal window of the program.
From the menu File select:
the New voice for create a new configuration, the Open voice for open a
created configuration previously (see figure 2).
Figure 2
If the Open voice is selected appears the following window (figure 3)
Figure 3
Select the desired line and press the button Open
13.16.1 How to insert the parameters in the configuration
(X5000 controller only)
From the Data Base of the variable select the parameter interested with a
click of the left key of the mouse.
If the selected parameter will be red press the button
Read writing.
If the selected parameter will be written press the button
the Write writing (figure 4).
set under the
set under
95