Canceling A Transmission While The Message Is Being Sent - Ricoh 1018 Operating Instructions Manual

Canceling a Transmission
While the Message is Being
Sent
Use this procedure to cancel a trans-
mission after the original has been
scanned.
Limitation
❒ If transmission finishes while you
are carrying out this procedure, it
will not be canceled.
Note
❒ If you cancel a message while it is
being sent, transmission is halted
as soon as you finish this proce-
dure. However, some pages of
your message may have already
been sent and will be received at
the other end.
A
Make sure that the machine is in
Facsimile mode and the standby
display is shown.
B
Press the { { { { Job Information} } } } key,
and confirm that "1. Cancel TX /
RX" is displayed.
The Information menu is shown.
Canceling a Memory Transmission
C
Press the { { { { OK } } } } key.
D
Press the 0 0 0 0 or 1 1 1 1 key until the file
you wish to delete is shown and
press the { { { { OK} } } } key.
E
Press 0 0 0 0 or 1 1 1 1 to select "Yes" and
press the { { { { OK} } } } key.
The file is erased, and the machine
will return to standby mode.
2
23