Compression Damping Adjustment; Tyres - Triumph Speed Triple Handbook

Compression Damping Adjustment

cgfb
1. Compression damping adjuster
The compression damping
situated below the rear suspension unit
reservoir.
To adjust the compression damping setting,
rotate the slotted adjuster clockwise to
increase, or anti-clockwise to decrease.
Always count the number of anti-clockwise
turns from the fully clockwise position.
Note:
• The motorcycle is delivered from
the factory with the compression
damping set at 1.0 anti-clockwise
turns from the fully clockwise
position.
Warning
The rear suspension unit spring pre-load is
not rider adjustable. Any attempt to adjust
the spring pre-load could result in a
dangerous riding condition leading to loss
of control and an accident.
Maintenance and Adjustment

Tyres

1
Typical Tyre Marking
adjuster is
This motorcycle is equipped with tubeless
tyres, valves and wheel rims. Use only tyres
marked 'TUBELESS' and tubeless valves on
rims marked 'TUBELESS'.
Wheel Marking
99